Pure aluminium shear panels as dissipative devices in moment‐resisting steel frames     

G. De Matteis  F. M. Mazzolani  S. Panico 《地震工程与结构动力学》2007,36(7):841-859

The use of energy dissipation systems for the seismic control of steel structures represents a valid alternative to conventional seismic design methods. The seismic devices currently employed are mostly based on the metallic yielding technology due to the large feasibility and efficiency they can provide. Within this context, in the current paper an innovative solution based on the adoption of low‐yield‐strength pure aluminium shear panels (SPs) for seismic protection of steel moment‐resisting frames is proposed and investigated. In order to prove the effectiveness of the system, a wide numerical study based on both static and dynamic non‐linear analyses has been carried out, considering a number of different frame‐to‐shear panel combinations, aiming at assessing the effect of the main influential parameters on the seismic response of the structure. The obtained results show that the contribution provided by aluminium SPs is rather significant, allowing a remarkable improvement of the seismic performance of the structure in terms of stiffness, strength and ductility, with the possibility to strongly limit the damage occurring in the members of moment‐resisting frames. In particular, it is clearly emphasized that the stiffening effect provided by SPs allows a more rational design procedure to be adopted, since the serviceability limit state check does not lead to unavoidable and uneconomical increase of the size of main structural members. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

三角钢标对GPS测量影响的试验分析     

曾云  张予杰 《全球定位系统》2003,28(4):24-28

GPS测量控制网为了与地面国家控制网进行联合的平差，必须与国家坐标系进行联测，GPS接收机有时也必须安置在有三角钢标的旧有控制点上。通过对此分析研究了三角钢标对GPS测量的影响，对设计和实施GPS测量的用户具有一定的参考价值。  相似文献   

Steel frames with bracing mechanism and hysteretic dampers     

M. C. Phocas  A. Pocanschi 《地震工程与结构动力学》2003,32(5):811-825

A new earthquake resistant structural system for multi‐storey frame structures, based on a dual function of its bracing components, is developed. This consists of a hysteretic damper device and a cross‐bracing mechanism with a kinetic closed circuit, working only in tension, so that cable members can be used for this purpose. Solutions are presented regarding the connections' design of three types of structural frame system, that are concerned throughout the study: braced moment free frame, braced moment resisting frame with moment free supports, and with moment resisting supports. The dynamic behaviour of the system is investigated on the basis of an SDOF model, and based on the response spectra method an approximate design approach of the controlled structures is shown. From the time history analysis of the structural systems for the El Centro earthquake the areas of appropriate stiffness relations of the frames to the hysteretic dampers and the cable braces are deduced, so that the energy dissipation of the system may be controlled by the damper‐cable bracing mechanism. Based on the results of these studies, a predesign approach is developed for the implementation of the control system in frame structures. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

Seismic response predictions of multi‐span steel bridges through pushover analysis     

Yi Zheng  Tsutomu Usami  Hanbin Ge 《地震工程与结构动力学》2003,32(8):1259-1274

In the new trend of seismic design methodology, the static pushover analysis is recommended for simple or regular structures whilst the time‐history analysis is recommended for complex structures. To this end, the applicable range of the pushover analysis has to be clarified. This study aims at investigating the applicability of pushover analysis to multi‐span continuous bridge systems with thin‐walled steel piers. The focus is concentrated on the response demand predictions in longitudinal or transverse directions. The pushover analysis procedure for such structures is firstly summarized and then parametric studies are carried out on bridges with different types of superstructure‐pier bearing connections. The considered parameters, such as piers' stiffness distribution and pier–0.5ptdeck stiffness ratio, are varied to cover both regular and irregular structures. Finally, the relation of the applicability of pushover analysis to different structural formats is demonstrated and a criterion based on the higher modal contribution is proposed to quantitatively specify the applicable range. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

Evaluation of predictors of non‐linear seismic demands using ‘fishbone’ models of SMRF buildings     

Nicolas Luco  Yasuhiro Mori  Yosuke Funahashi  C. Allin Cornell  Masayoshi Nakashima 《地震工程与结构动力学》2003,32(14):2267-2288

Predictors (or estimates) of seismic structural demands that are less computationally time‐consuming than non‐linear dynamic analysis can be useful for structural performance assessment and for design. In this paper, we evaluate the bias and precision of predictors that make use of, at most, (i) elastic modal vibration properties of the given structure, (ii) the results of a non‐linear static pushover analysis of the structure, and (iii) elastic and inelastic single‐degree‐of‐freedom time‐history analyses for the specified ground motion record. The main predictor of interest is an extension of first‐mode elastic spectral acceleration that additionally takes into account both the second‐mode contribution to (elastic) structural response and the effects of inelasticity. This predictor is evaluated with respect to non‐linear dynamic analysis results for ‘fishbone’ models of steel moment‐resisting frame (SMRF) buildings. The relatively small number of degrees of freedom for each fishbone model allows us to consider several short‐to‐long period buildings and numerous near‐ and far‐field earthquake ground motions of interest in both Japan and the U.S. Before doing so, though, we verify that estimates of the bias and precision of the predictor obtained using fishbone models are effectively equivalent to those based on typical ‘full‐frame’ models of the same buildings. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

钢结构住宅体系墙板及墙板节点足尺模型振动台试验研究   总被引：5，自引：3，他引：5  

李国强  赵欣  孙飞飞  高文利  杨尊权  靳世文 《地震工程与工程振动》2003,23(1):64-70

本文对山东安尔发建筑科技有限公司开发的钢结构住宅体系的墙板及墙板节点足尺模型进行了模拟地震振动台试验研究，分析了该体系的自振特性、地震反应特征和破坏现象，特别对外墙板及内墙的节点的抗震性能进行了深入研究，得出了有益的结论，为钢结构住宅体系的进一步推广提供了试验依据。  相似文献   

往复荷载作用下矩形钢管混凝土压弯构件承载力计算     

杨有福  韩林海 《地震工程与工程振动》2003,23(5):125-129

本文基于往复荷载作用下矩形钢管混凝土压弯构件的实验结果，比较了国内外比较典型的设计规范(程)，包括英国BS5400(1979)、美国ACI318—99(1999)和AISC-LRFD(1999)、日本AIJ(1997)、欧洲EC4(1994)、中国GJB4142-2000(2001)和福建省地方标准(送审稿)，及本文数值方法在计算往复荷载作用下矩形钢管混凝土压弯构件承载力的差异。结果表明，在进行往复荷载作用下矩形钢管混凝土压弯构件承载力计算时，各种计算方法获得的承载力都偏于安全，其中，数值计算结果与实验结果最接近，GJB4142—2000(2001)的计算结果与实验结果吻合程度稍差，ACI318—99(1999)，EC4(1994)和福建省地方标准(送审稿)的计算结果比实验结果约低20％，而BS5400(1979)、AISC—LRFD(1999)和AIJ(1997)的计算结果比实验结果总体上低30％以上。本文结果可供进行矩形钢管混凝土结构设计时参考。  相似文献   

空腔结构复合填充墙-钢框架抗侧力性能试验研究   总被引：4，自引：0，他引：4  

管克俭  李捍无  彭少民 《世界地震工程》2003,19(3):73-77

通过空腔结构复合填充墙-钢框架和同尺寸纯钢框架的对比试验，分析了空腔结构复合填充墙-钢框架的抗侧力性能和滞回性能。研究结果证明空腔结构复合填充墙是一种理想的抗侧力体系，可用于多层或小高层钢结构住宅，作为结构的抗侧力构件。  相似文献   

变刚度钢管混凝土短柱隔震结构弹塑性动力分析     

张玉良  成世峰  张铜生 《震灾防御技术》2006,1(2):129-136

采用HBTA2.5程序,对一变刚度钢管混凝土短柱隔震结构进行了弹塑性时程分析。分析结果表明,其隔震装置的水平变形和耗能能力可以大大减轻地震对结构的影响。提出钢管混凝土短柱隔震结构在工程应用将有很好的发展前景。  相似文献   

世界钢铁工业发展趋势及对我国钢铁工业的影响   总被引：6，自引：1，他引：6  

张晓平  张青云 《世界地理研究》2005,14(2):80-86

20世纪是世界钢铁工业快速发展的世纪。在科技进步和市场需求的拉动下，世界钢铁生产的规模、地区格局与原材料供应等都发生了显著变化。进入21世纪，世界钢铁工业将在高科技的推动、原材料供给与产品销售的激烈竞争、以及环境容量的制约下，进入新的结构调整和发展时期。未来世界钢铁工业将以发展中国家的增长为主；生产体制从注重产量向环境友好转化；市场竞争将加速跨国公司全球资本重组。我国钢铁工业在今后20至30年内仍有较大发展空间，国内外市场需求的变化与跨国公司的并购重组，将推动我国钢铁工业布局进一步接近市场，向沿海或大都市周边地区集中。  相似文献